The liquid filling machine drip trouble how to solve?

Liquid filling machine is in use process, sometimes dripping liquid all sorts of problems, so, how do we solve this problem? The number of 1, filling is not accurate. In the liquid filling machine, the feed box filling is insufficient, lead to liquid level is not stable, you can increase the filling quantity or to close the filling head of ball valve, reset the filling time ( Increase the filling time) In order to reduce, slow filling speed is used to solve. 2, adjust the digital dial the number or after the dialer, time constant, then turn the power off and turn it on again. 3, stable liquid level, liquid filling quantity is not accurate. Channels have sundry jam filling form, mainly within the notches or filling nozzle, check and clean up, liquid filling machine may be associated with equipment of irrigation water drippage. 4, the nozzle opening is damaged, through inspection, mouth filling nozzle is damaged, must immediately repair or replace filling nozzle mouth; 5, filling nozzle hole is damaged, can take out the filling nozzle to repair the orifice. 6, if the filling machine Angle seat o-ring corrosion or wear is very serious, can also cause dripping. At this point, we need to replace the o-ring. 7, if fill head ball valve damage, we need to immediately replace the ball valve, the liquid filling machine drop another reason may be filling head ball valve damage. 8, no filling touch after injection switch, time relay digital light leds don't blink: injection switch damage or loose time relay base, replacement of the same model injection switch or press time.
Guangdong Jinzong Machinery Co., Ltd. is fully committed to supplying high quality products and services.
To understand how efficiently works, go to Jinzong Machinery for more information.
There's the area of manufacturing chemical reactor that's becoming very important. If you can create those things, you build this closed bond.