The use industry and operation sequence of eye drops filling machine

The eye drops filling machine is used in the pharmaceutical, chemical, food, light industry and other industries to perform vacuum negative pressure and self-priming filling equipment for glass, plastic, metal and other containers. The caliber of the container to be filled by this machine should be small, and the expansion stress of the liquid surface in the caliber should be greater than the static pressure of the liquid, which means that the liquid will not flow out by itself after the container is inverted. Such as oral plastic bottles, Fengyou essence bottles, eye drops, cosmetic perfume bottles, battery liquid filling and so on. The eye drops filling machine integrates mechanical, pneumatic and automatic. Jinzong eye drops filling machine is a new generation of eye drops filling special equipment in China. It has the characteristics of high degree of automation, high yield, wide adaptability, and good stability, so it is favored by the majority of users. After twelve years of continuous improvement, the current models are becoming more and more mature, with high technical content, good adaptability, and other characteristics! This model has been exported to foreign countries in batches. This machine has automatic bottle unscramble, automatic bottle detection (bottle filling, no bottle filling), bottle falling inner stopper, bottle falling cap with inner stopper, and automatic capping function. It is suitable for filling round, flat or angular filling bottles with various shapes, and it is especially suitable for domestic materials and various special-shaped bottles and inner caps. Compared with similar foreign filling machines, the function of this machine The sexual advantage is obvious. It fully reflects our company's strength in the design and production of non-standard products. The operation sequence of the eye drops filling machine: Put the filled liquid bottle upside down on the work basket, and check that the lower mouth of the liquid bottle should be aligned. Put the vacuum basket in the vacuum tank, close the lid and lock it tightly. Close the vent valve, the liquid inlet valve, turn on the vacuum pump, adjust the vacuum valve (depending on the test filling volume) to meet the technological requirements, and step on the foot pedal to insert the liquid into the lower mouth of the filled liquid bottle. Slowly open the inlet valve, at this time the liquid level in the filling rises, and at the same time open the vent valve to keep the liquid level between the liquid level specified by the sight glass. When the pointer of the vacuum gauge is in the 0 state, it is proved that the filling is completed, and the foot collapse board is returned, and the quick-opening lid can be opened to take out the filled liquid bottle. For troubleshooting of vacuum mercury, please refer to (XD series but grade rotary vane vacuum pump instruction manual). If the vacuum pump is not used for a long time (more than seven days), the used oil in the mercury should be drained, flushed with new oil, and replaced with a new one. The middle moisture corrodes the pump body.

To be the best worldwide provider of higher-value chemical reactor and the center for quality employment opportunities.

We are proud to be one of the largest suppliers out there. You will love what we offer for your chemical reactor solution. Check our website at Jinzong Machinery or call to talk to our customer service department with any questions you may have.

Guangdong Jinzong Machinery Co., Ltd. can assure that it is one of the best products in the market at present.

If Guangdong Jinzong Machinery Co., Ltd. added selling plans, offered more chemical reactor, and increased service regions, it would suit the needs of more users.

We utilize our expertise to develop services that add value at each phase of thechemical reactor development cycle. We evaluate and implement new strategies in response to changing customer profiles and market conditions.