Liquid filling machine which fault and maintenance methods

Liquid filling machine fault and maintenance: 1, the crank boot properly after rotation, fault: a: 1. Fixed on the pole down, inside and outside the tube when push the syringe and firm, crank rotation. Loosen the nut and move the fixed link up on to the appropriate position, then tighten the nut. 2. Assembly syringes, inside and outside the tube is not clean, jam, need to take out the syringe cleaning. 3. Install the liquid injection system to the end of the bearing components. To make it not work properly, you must reinstall. 4. Injection, uneven, tighten the joint end, leak phenomenon, need to tighten further. Second, the machine working normally, but there is no point liquid, failure: 1. The valve needs cleaning foreign body in it. 2. The valve, the thimble placed incorrectly ( Both thimble points down, can not be installed backwards. 3. If 1, 5 ml of the bottom of the piston type liquid exports have leakage, you should remove the cylinder tube to replace the sealing ring provided. Note: seal adopted & phi; 65× 3. 1 x3。 1 acid-proof alkali resistant seal. Three quantitative filling machine, liquid sterilization and washing: 1. Loosen up and fixed screw, remove the whole disinfection liquid system or remove the cleaning disinfection respectively. 2. Will start into the tube in the cleaning fluid to clean.

If you are sourcing for product development or manufacturing operations, you won't miss Guangdong Jinzong Machinery Co., Ltd.'s list of offer.

Deliver value to our customers by providing the most reliable and efficient products as chemical reactor.

chemical reactor, is an alternative product for cosmetic machinery manufacturers to investors and consumers who are passionate about our products or services.

Jinzong Machinery focuses on three key elements—process, people, and technology—the authors found that people of two seemingly opposite cultures are able to work together in a project-based environment to complement each other and reap mutual benefits for a win-win result.

With a few simple , and a little bit of cosmetic machinery manufacturers, you to can handle cosmetic machinery manufacturers on your own.