Installation and operation steps of eye drops filling machine

The eye drops filling machine is an automated machine, so the dimensions of easy-pull bottles, bottle pads, and bottle caps are required to be uniform. You must first turn the machine with the crank handle to see if there is any abnormality in the rotation, and it is indeed normal before you can drive. When adjusting the machine, use appropriate tools. It is strictly forbidden to use excessive tools or excessive force to disassemble parts to avoid damage to the machine parts or affect the performance of the machine. Whenever the machine is adjusted, be sure to tighten the loose screws, and use the crank handle to turn the machine to check whether the action meets the requirements before driving. The machine must be kept clean. It is strictly forbidden to have oil stains, liquid chemicals or glass fragments on the machine to avoid damage to the machine. Therefore, it is necessary to remove the liquid chemicals or glass fragments in time during the production process of the machine. Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department. It should be scrubbed once a week, especially the areas that are not easily cleaned in normal use or blown with compressed air. After the machine is unpacked, first check whether the random technical information is complete and whether the machine is damaged during transportation, so as to solve it in time. Install and adjust the feeding component and the discharging component according to the outline diagram in this manual. Add new lubricating oil to each lubrication point. Rotate the machine with the crank handle to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft), and the machine must be grounded for protection.　　Operation steps of eye drop filling machine: 　　1. Put the filled liquid bottle upside down on the work basket, and check that the lower mouth of the liquid bottle should be aligned.　　 2. Put the vacuum basket in the vacuum tank, close the lid, open the lid and lock it tightly.　　3. Close the vent valve, the inlet valve, turn on the vacuum pump, adjust the vacuum connection valve to make the vacuum degree (depending on the test filling volume) meet the technological requirements, step on the foot pedal to insert the liquid into the lower mouth of the filled liquid bottle.　　4. Slowly open the inlet valve, the liquid level in the filling rises at this time, and the vent valve is opened at the same time to keep the liquid level between the liquid level specified by the sight glass.　　5. When the pointer of the vacuum gauge is in the 0 state, it proves that the filling is completed, return the foot collapse plate, and open the quick-opening lid to take out the filled liquid bottle. 6. For troubleshooting of vacuum mercury, please refer to (XD series but grade rotary vane vacuum pump instruction manual). If the vacuum pump is not used for a long time (more than seven days), the used oil in the mercury should be drained, flushed with new oil, and replaced. Prevent the water in the oil from corroding the pump body.

If you are looking for an effective and safe way to take care of cosmetic machinery manufacturers, then chemical reactor cosmetic machinery manufacturers are the best bet.

Now you can enjoy cosmetic machinery manufacturers with Guangdong Jinzong Machinery Co., Ltd.'s latest collection of cosmetic machinery manufacturers chemical reactor products. Do visit now, at Jinzong Machinery.

Guangdong Jinzong Machinery Co., Ltd. are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.

While manufacturing chemical reactor, we always pay attention to the technology and quality of the product.

Like anything else in cosmetic machinery manufacturers, there are a variety of choices and types to choose from, and each of them will affect your budget in some form. Guangdong Jinzong Machinery Co., Ltd. offers a range of quality at competitive prices.