Eye drops filling machine application and cleaning process

The eye drops filling machine is suitable for the pharmaceutical, chemical, food, light industry and other industries to use vacuum negative pressure and self-suction filling equipment for glass, plastic, metal and other containers. The diameter of the machine used for the filled container should be small. The expansion stress of the inner liquid surface should be greater than the hydrostatic pressure. Such as oral liquid plastic bottles. Fengyou essence bottle, eye drops bottle, cosmetic perfume bottle, battery liquid filling and so on. The eye drops filling machine is composed of important parts such as the bottle feeding turntable, the bottle feeding, the dividing plate, the filling system, the inner plug and outer cap oscillator, the cap screwing system, the bottle outlet track and electric control. Relying on the positioning of the halving plate, the cam drives the needle to move up and down for filling, completing the filling action at one time. Through the turntable and the bottle feeding, the equalizing plate positioning filling, shaking the stopper, the manipulator moves the inner stopper, adding the outer cap, and screwing the cap to complete the bottle-out action. The caliber of the filled container should be small, and the liquid surface expansion stress within the caliber should It is greater than the hydrostatic pressure, which means that the liquid will not flow out by itself when the container is inverted. Such as oral liquid plastic bottles. Wind oil bottles, eye drops, cosmetics, perfume bottles, battery fluid filling, etc., 20# mechanical oil should be added to the vacuum pump before starting up. The oil volume must always be controlled at the position specified by the oil window, and the large oil volume should not exceed the oil. Three quarters of the height specified by the window. The structure is simple, reliable, and there are few failures; it adopts a cone-shaped piston, which has good sealing performance, accurate dispensing liquid volume, and convenient liquid volume adjustment; the liquid contact part is made of stainless steel, which is easy to install and unload, and can be used for aseptic dispensing; , The push rod and piston are made of stainless steel, which is corrosion-resistant and wear-resistant; the speed is continuously adjustable, and the operation is convenient. The cleaning process of the ophthalmic bottle filling machine: the liquid can be drained from the drain port, rinse with water, and clean with a non-woven cloth. Before the operation, clean the sterile preparations or the 10,000-level area, and then rinse with water for injection, rinse three times for 5 minutes each time, until there is no residue, and then use 75% alcohol to clean the parts in contact with the material. The inspection results are all Clean the traces before entering the filling process, close the vent valve, the liquid inlet valve, turn on the vacuum pump, adjust the vacuum valve to meet the process requirements, step on the foot pedal to insert the liquid into the lower mouth of the filled liquid bottle, and the container is filled. The caliber should be small, and the surface expansion stress of the liquid in the caliber should be greater than the hydrostatic pressure, which means that the liquid will not flow out by itself after the container is inverted. The liquid level is maintained between the liquid level specified by the sight glass. When the pointer of the vacuum gauge is in the 0 state, it is proved that the filling is completed, and the foot collapsed board is returned, and the quick-opening lid can be opened to take out the filled liquid bottle.

For the study, researchers defined Jinzong Machinery as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.

For details on chemical reactor, see Guangdong Jinzong Machinery Co., Ltd. at Jinzong Machinery.

As the manufacturing procedure of chemical reactor becomes more regulated, the costs to businesses will increase and the workforce will suffer as a result.