The working principle of the small bottle filler

( 1) Transmission principle: power, through the pulley from motor to the gear reducer worm shaft, again through the gear to the shaft cover, filling and rolling. Filling, capping head and the thumbwheel synchronous work, the power, through the bevel gear to bottle dial device. ( 2) Part of filling principle: eye language transition from bucket wheel to wheel box, then sent to the synchronous belt. The bottle by synchronizing with insert moving forward at a constant speed. Under the control of the tracking mechanism, needle is inserted into the bottle, filling and bottle synchronous progress, realize tracking filling. Has a latent needle with the liquid surface, have the effect of foam. ( 3) Cover supply system: the lid orbit, cover LIDS and covered the wear mechanism. Cover head using electromagnetic spiral vibration principle, will be disorderly to cover in a row, then through reverse torsion mode into the cap rail. When through the cover wear mechanism, bottle hanging the lid through the cover board, so that the lid is correctly placed. ( 4) Block: cover and into the rotor block under the control of the CAM on the lid. At the same time, the cylinder to hold the bottle, the bottle. At that moment, block screw down the lid and leave the lid and return to the original position. ( 5) Tracking filling mechanism: servo motor drives the gear and rack movement, filling needle reciprocating motion. By adjusting the injection needle and the relative position of the mounting bracket, you can insert the needle accurately in the middle of the bottle.