Pressure mechanism pills what principle

Jin Zong medicine tablet press machine mainly research and development and production, Jin Zong small talk to you today what are the production principle of tablet press? Basically has the following two points: 1, the dose of control: all kinds of tablet have different doses, large dose adjustment is by choosing different punch diameter of punching die. After selected die size, small dose adjustment is through the adjustment of rushed into the depth of the die, which changes after the back cover of the actual length of the die hole, to achieve the purpose of regulating drugs in the die filling volume. Therefore, under the tableting machine to have impact on the original location of the setup of the die in order to satisfy the requirement dose adjustment. 2, the thickness of the tablets and the degree of compaction control: the dosage is set according to the prescription and pharmacopoeia, cannot be changed. Storage-transpor-tation, save and disintegration time limit requirements, in order to pressure for a little pressure on dose is required, it will also affect the actual thickness and appearance of pills. Pressure for pressure regulation is necessary. This is by adjusting the impact on the amount of downward in the die. Some tablet press down on tableting process not only have action, at the same time also can have upward movement, it ran down from the upper and lower relative motion complete tableting process together. But pressure regulation is rushed down on by adjusting the quantity of institutions to implement pressure regulation and control.