Paste filling cap unscrewing machine principle of work and processes

Paste filling cap unscrewing machine working principle: cap in the lower hopper, by frequency conversion elevator belt conveyor to cover mouth, by two synchronous block function with implementation, and three groups of six blocks round block function through mechanical torque adjustment function implementation. Paste filling cap unscrewing machine working principle and process: 1. Finishing the bottle, with rotary bottle machine will be messy empty bottles neatly, put to the conveyor belt, empty bottle was held up by the filling head below the chuck. 2. Plunger pump filling. After the completion of the filling, chuck will fill up the bottle away, at the same time will empty bottles block. 3. After filling, chuck location to send the bottle to the seal, see after entering the chuck. 4. Suck up automatically within and press it into the bottle. 5. When the bottle through hang curtain, the lid was hanging up. Also the lid of the classified by vibrating plate, and then into the slide, and then into the LIDS. Next, we look at the part of the lock. 6. Hang up the lid, cover the hammer to press the lid to the bottom. Covering with a claw knife lid and the bottle rolled into one. The whole process is like this. Although the product may be different, but basically this is the working principle of this capping machine. 7. Liquid filling cap unscrewing machine not only can be filled with liquid, can also be filled with small bottles of liquid, such as injection, disinfectants, all kinds of oral liquid, essential oil, cod liver oil, etc. Four speed regulating motor used for block, clamp, conveying and block. This machine is a high degree of automation, good stability, convenient adjustment, change the bottle shape or caps do not need spare parts, can be finished by adjusting the ( If equipped with a feeder, vibration plate can be automatically sent to the lid) 。