Cans of filling machine operation

1. Will be filled with liquid bottle upside down in the work of the stem, and check whether the liquid bottle mouth under the alignment. 2. Will work the blue into the vacuum tank, will close it, open the lid and lock onto it. 3. Close the exhaust valve and liquid inlet valve and open the vacuum pump, vacuum valve so that the vacuum degree achieves the technical requirements, on the pedal insert liquid filled liquid bottle mouth. 4. Slowly open the inlet valve. At this point, the tank liquid level rise, at the same time, open the discharge valve to reduce the liquid level, the liquid from the tank by the liquid bottle. Reasonably adjust the two valve to keep liquid level between the level specified in the viewer. 5. When the vacuum gauge are in a state of 0, the pointer indicates that liquid filled and return the pedals, and then open the quick opening cover removed filled liquid bottle. Please refer to the troubleshooting of vacuum pump. If do not use the vacuum pump for long time, should the waste oil drain pump, flushing and replace with new oil, to prevent the water in the oil pump body corrosion. Filling machine