Oil filling machine, our demand for oil growing, for the enterprise, if the oil filling machine appear problem, can cause great influence to the production schedule, today we are here to discuss the common faults of machine oil filling machine and maintenance method, in response to sudden demand.
Controller starts, oil discharge from the nozzle, but the controller does not measure
Run less)
。
Response: reflection signal lines will damage or disconnect, if broken, according to the primary connection, or replacement;
If platinum resistance is damaged, please replace;
If the temperature is shown in more than 12 ℃, clarify the temperature signal is short circuit or disconnect.
If the temperature is displayed as -
2°
C, explain the temperature signal connection is not correct, please reconnect, if there is no fluctuations, temperature display shows that platinum resistance has worked, please change.
Second, the type oil filling nozzle can not down.
Response: to reflect air compressor switch whether can open, the wind out air pressure is normal.
Third, pay close attention to the concept of the nozzle.
Response: to reflect air compressor switch whether can open, the wind out air pressure is normal.
Fourth, oil production will not fluctuations on the filling.
Response: clean the filter oil filling machine filling machine
production line can be configured using a variety of functions combination linkage production equipment, can be configured according to production requirements, needs to understand can ask customer service.
Jinzong Machinery can also foster research that is more useful and influential in society at large.
Now you can buy cheap at wholesale price at Guangdong
Jinzong Machinery Co., Ltd.! Do visit Jinzong Machinery for great deals!
Based on the chemical reactor, here are the top compliance challenges businesses face, and what you can do to make them easier on ourselves.
Guangdong Jinzong Machinery Co., Ltd. is a initial company that supports expertise in searching marketing solutions.
Increasing consumer awareness and rising concern about improving cosmetic machinery manufacturers are driving the market of products.
